Displaying Operating Values; Deactivating The Keypad Lock; Settings; Settings Menu For "Manual Mode - Miele PAC 1045 Mode D'emploi

Displaying operating values

The operating values of the air purifier can be displayed via the
play menu.
Press and hold the  button for more than 3 seconds.

Operating values display
Operating hours 1245
Time to filter change 523
Miele V01.1 PAC 1080
09.11.2020 Mon 14:28:00
Operating values display
The
Operating values display
Filter saturation 25
Room temp.: 22
ThermoControl temp. 34
09.11.2020 Mon 14:28:00
Press the  or  button briefly to scroll through the pages of the

play menu.
To exit the operating values display, briefly press the  and  buttons at the same time

(<1 sec) or wait 10 seconds.

Deactivating the keypad lock

If the display lighting is switched off, the keypad lock is activated. You can deactivate the
keypad lock by holding down the  and  buttons for at least 3 seconds.
If no buttons are pressed within 60 seconds of deactivating the keypad lock, it will be re-
activated again automatically.

Settings

Settings menu for "Manual mode"

Settings
Manual mode
Manual+time mode
CO2 mode
If settings are configured for the Flow, these settings will automatically be adopted for
the other operating modes.
Tip: If you do not wish to make any changes to the Flow, you can exit the Settings menu
quickly by pressing the  and  buttons briefly at the same time.
h
h
menu is now displayed.
%
°C
°C
Flow
Off
On
Back
Select option
Flow
Off
On
Back
Select option
Flow speed
100 %
Please set
Flow time
05 min
Please set
en - Operation
Operating values dis-
Operating values dis-
47