Fig.1
FUNCTIONAL DESCRIPTION
TOOLS
You will need the following tools to assemble your stand:
Phillips #2 screwdriver
10 mm open-end wrench
13 mm open-end wrench
2 - 19 mm open-end wrenches
5 mm hex Allen wrench
PACKAGE CONTENTS
Use this section to identify the parts of your stand.
1 plastic bag containing fasteners and hardware to assemble your stand (all
shown below, actual size):
2 pcs. M12 X 140 mm long Hex Head Bolts (
drawing, p.27)
2 pcs. M12 Hex Locknuts (
A. Wheel
D. Roller Height Locking Knob
H. Rubber-padded Handle
I.
Release Lever
J.
Piston
K. Lock Pin
L.
Front Foot
M. Extension Locking Knob
fig.F2
Fig.2
)
19