Operation; Control Panel; Daily Use - Electrolux ENN2801EOW Notice D'utilisation

6 www.electrolux.com

3. OPERATION

3.1 Control panel

1. Temperature indicator LED
2. Fast Freeze indicator
3. Fast Freeze button
4. Temperature regulator
ON/OFF button
3.2 Switching on
1. Insert the plug into the wall socket.
2. Touch the temperature regulator
button if all LED are off.
3.3 Switching off
Keep touching the temperature regulator
button for 3 seconds.
All indicators light off.
3.4 Temperature regulation
To operate the appliance, proceed as
follows:
• touch the temperature regulator button
until the LED corresponding to the
required temperature lights up.

4. DAILY USE

WARNING!
Refer to Safety chapters.
All manuals and user guides at all-guides.com
1 2
4 3
Selection is progressive, varying from 2
to 8°C.
At first button touch actual setting LED
keeps blinking.
Any time the button is touch the set
temperature is moved to 1 position .
Corresponding LED will blink for a
while.
Touch the setting button until the
required temperature is selected. The
set will be fixed
coldest setting: +2°C
warmest setting: +8°C A
medium setting is generally
the most suitable.
However, the exact setting should be
chosen keeping in mind that the
temperature inside the appliance depends
on:
• room temperature
• how often the door is opened
• quantity of food stored
• appliance location.
3.5 FastFreeze function
You can activate the FastFreeze function
by pressing the FastFreeze button.
The LED corresponding to the symbol
FastFreeze indicator lights up.
You can deactivate the FastFreeze
function by pressing the FastFreeze
button again.
The FastFreeze indicator will light off.
This function stops
automatically after 52 hours.