Commissioning The T3 Ip Telephone - Avaya Integral T3 Notice D'utilisation

All manuals and user guides at all-guides.com
1 Display
2 Level switch for display keys
3 Clear key
4 Arrow keys for navigation around the display
5 OK key
6 Escape key
7 Numeric keys with letters
8 Function keys, some with LEDs
9 Volume/Contrast keys
10 Call indicator
11 Display keys for destinations, functions and partners
12 Cover with alphabetic keyboard underneath

Commissioning the T3 IP telephone

Connecting and registering the T3 IP telephone
After connecting to the LAN (Local Area Network) and to the power supply (only if
the telephone is not powered via the LAN), the telephone software is activated and
subsequently searches automatically for a gatekeeper (responsible for access
authorisation). Usually a gatekeeper is found, and you can then make a call right
away. However, it will not yet be possible to take calls. To do this you first have to
enter your number and PIN.
Scroll to the status message Log on new user
Confirm selection.
... Enter extension number.
Go to SecPIN or PIN menu item.
... Enter PIN.
Confirm selection. The display then shows the message "Secure log-on
complete" or "Log-on complete". You can now also be reached under the number
you have entered (extension number).
• For unencrypted communication the default setting for the PIN is 0000 (if user is
asked for a "PIN").
• For secure encrypted communication your system administrator will tell you the
default setting for the PIN (if user is asked for a "SecPIN").
GB
i
15