Lenze L-force 9400 Serie Instructions De Montage page 33

(
Stop!
No device protection if the mains voltage is too high
The mains input is not internally fused.
Possible consequences:
ƒ
Protective measures:
ƒ
ƒ
(
Stop!
Overtemperature
The mains filter may become hot if permissible limit values are exceeded
during operation.
Possible consequences:
ƒ
Protective measures:
ƒ
2.3 Safety instructions for the installation according to UL
O
Warnings!
Conditions of Acceptability:
ƒ
ƒ
EDK94ZMR47XDB DE/EN/FR/ES/IT 4.0
Safety instructions for the installation according to UL
Destruction of the device if the mains voltage is too high.
Observe the maximally permissible mains voltage.
Fuse the device correctly on the supply side against mains fluctuations and
voltage peaks.
The device may be damaged or destroyed.
Wire the overtemperature disconnection with the digital DO2 output
according to circuit proposal.
The products are only intended to be used for Lenze Drives E94ARNE0134
and E94ARNE0244.
– All test results are only valid for this Lenze Drives.
The devices are only evaluated for factory wiring use.
l
Safety instructions 2
33