Testing SD card performance
You can test SD cards to confirm that they can be used with the
1.
Press
.
2.
Use
to select
"SD CARD",
and press
3.
Use
to select
"Performance Test",
and press
4.
Press
to start the
performance test.
Card access rate
96
All manuals and user guides at all-guides.com
.
.
Test progress
.
5.
When the test completes,
the result will be shown.
If the MAX access rate is
100%, the result will be
"NG" (no good).
6.
To cancel testing,
press
.
NOTE
Even if an SD card is evaluated as "OK" by the performance
test, this does not guarantee that write errors will never
occur. Please use this test just as a guide.