Chillafish bunzi Guide D'utilisation page 4

4.0 Switching between 3-wheel and 2-wheel mode
There are no tools needed for switching between the 2-wheel and the 3-wheel
mode. Follow these steps to switch between 2- and 3-wheel mode:
1. Unscrew the seat fixer at the bottom of the seat and lift the seat
from the frame
2. Turn both legs of the frame 180° to the other side. You will notice that the
frame legs hinge around the handlebar.
3. Connect the seat again securing both frame legs at the other side of the
handlebar. You will notice that the bottom side of the frame leg has fitter
holes to correctly fit the seat.
ATTENTION: NOTE THAT IN 3-WHEEL POSITION ONLY THE LOWEST SEAT
POSITION IS AVAILABLE AND IN 2-WHEEL POSITION ONLY THE HIGH-
EST SEAT POSITION IS AVAILABLE. DO NOT ATTEMPT TO FIT THE SEAT
AT THE HIGH POSITION IN 3-WHEEL MODE OR AT THE LOW POSITION IN
2-WHEEL MODE. ALWAYS MAKE SURE THE FITTER STUBS FIT IN THE
FITTER HOLES IN THE BOTTOM OF THE FRAME TO ENSURE A GOOD
SEAT FIXATION.
If you want to learn more on how and why your child can more easily learn
balance with our "gradual balance concept" visit our website and download
"THE GRADUAL BALANCE concept.pdf" from our download center. Alter-
natively type this llink in your browser to download:
http://www.chillafish.com/downloads/The_GRADUAL_BALANCE_con-
cept.pdf
4