Keller CellaTemp PKL63 Mode D'emploi page 37

Manuel d'utilisation du CellaTemp PKx 6x
It can further be set which temperature is displayed or available at the output
during the measurement�
• [d2] → [q. A no] = [t. h ld. ] During the measurement the previous rea-
• [d2] → [q. A no] = [t0]
1: Measuring object in front of pyrometer
2: Limit [DTD]
3: Temperature output [q. A no] = [t0]
4: Previous reading
5: Lower limit of temperature range
6: New reading
7: Temperature output [q. A no] = [t. h ld. ]
ding is available at the temperature output�
During the measurement the temperature is
set to the lower limit of the temperature range�
37
FR