Changing The Settings - Hama MW1002 Mode D'emploi

Operation
Switching the device on and off
u To switch on the device, press and hold the "+/ "
button [7] for approx. 3 seconds or slide the faceplate
upwards.
u To switch off the device, slide the faceplate downwards
and press and hold the "+/ " button [7] for approx. 4
seconds.

Changing the settings

u Slide the faceplate downwards.
u Press and hold the MODE button [6] until the device
beeps.
u Press MODE repeatedly until the following symbol is
displayed:
CLOCK [3] –– For setting the time
UNIT [14] –– For setting the unit of measurement
ASC [11] –– For automatic sensor cleaning
CLEAN [4] –– For cleaning
u Press the SET [8] button to activate the selected function.
NOTE
► If no button is pressed for approx. 1 minute, the
device ends the settings mode and displays the
time.
MW-1002
All manuals and user guides at all-guides.com
GB
35