Cleaning And Maintenance - Bestron ADV45S Mode D'emploi

All manuals and user guides at all-guides.com
room. Press the swivel lock (see figure 5.)
on the motor housing fully in.
c. r emain in the same position whilst the fan
is turning. This will ventilate one area. Pull
out the oscillation button until you hear it
click.
4. Put the plug into the wall socket.
5. S witch on the fan by turning the speed controller
the desired speed (see figure 6.)
a. position '1': the fan operates at low speed.
b. position '2': the fan operates at normal speed.
c. position '3': the fan operates at high speed.
6. S top the fan by turning the speed controller to
position '0'.

cleAninG And mAintenAnce

Over the course of time dust can accumulate between the spokes in the fan housing, and on the fan blades.
Always begin by trying to remove the dust with a brush and/or vacuum cleaner. If this does not remove all
the dust you can always dismantle the fan and clean it.
1. Remove the plug from the wall socket.
2. L oosen the fan housing using a
crosshead screwdriver.
3. R emove the front half of the filter
housing.
4. H old the fan blades to stop them
from turning, and unscrew the
spinner by turning clockwise in the
direction of the 'LOOSEN' arrow.
Remove the fan blades from the
motor housing.
5. R emove the rear half of the fan
housing by turning the locking
ring at the centre of the housing
anticlockwise. Remove the ring and the housing from the motor housing.
6. C lean the dismantled parts and the base with a damp cloth. Dry thoroughly with a dry cloth.
7. Clean the motor housing with a dry cloth.
• Verify that the appliance is not connected to the power supply before you clean it.
• N ever use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
Reassemble the fan using the procedure given under by 'Assembling the fan'.
the enVironment
• D ispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
• W hen this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to the
symbols on the product, the user's instructions or the packaging.
• T he materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
• C ontact your municipality for the address of the appropriate collection point in your neighbourhood.
user's instructions
8
20
3 2 1 0