Cleaning And Maintenance - Bestron AFT770ZRC Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

OPERATION - Ventilation

1. Connect the plug into a wall socket. The appliance

beeps, which is normal.

2. Press the "on/off" button (see figure 6.1). on the

control panel. At first start-up the fan will operate at

"low" speed.

3. Press the "speed" button (see figure 6.4) once or

multiple times to choose between low, medium and

high speed this is indicated by "low", "med" or "high"

(see figure 6.3).

4. Press the "swing" button (see figure 6.5) to activate

the oscillating function. The fan tower will oscillate from

left to right, ventilating a larger part of the room. Press

the "swing" button again to deactivate the oscillating

function.

5. Press the "on/off" button again to turn off the fan.

6. Remove the plug from the wall socket after use.

OPERATION - Timer function

The appliance is equipped with a timer with allows you to shut off the appliance at the end of a predetermed

time. Press the "timer" (see figure 6.2) button once or multiple times to set the shut-off time between

0,5 - 7,5 hours, in steps of 0,5 hours. The "timer" will indicate the set shut-off time with red lights on the

control panel. Press the "timer" button once more after "7,5h" is indicated to deactivate the timer function.

OPERATION - Remote control

The appliance can also be controlled using the included remote control. The remote control operates on a

CR2025 button cell battery (included). The buttons on the remote control work the same as the buttons on

the control panel.

TIPS

•

The distance between the appliance and the remote control should,nt be more than 6 meters.

•

Point the remote control at the appliance and be sure that the angle is smaller than 30 degrees.