Listening To Stored Stations; Scanning Receivable Stations (Scan); Setting The Scanning Time (Scan Time); Confi Guring The Display - Blaupunkt Brisbane SD48 Notice D'utilisation Et De Montage

Radio mode
Note:
Any stations that were previously
stored in this memory bank are deleted
in the process.
Use the BND•TS button 5 to select
u
one of the memory banks FM1, FM2 or
FMT for storing FM stations or one of
the memory banks AM or AMT for stor-
ing AM stations.
Press and hold down the BND•TS but-
u
ton 5 for longer than two seconds.
The storing procedure begins. The display
shows "FM TSTORE" or "AM TSTORE". After
the process has completed, the radio will
play the station that is stored in memory lo-
cation 1 of the FMT or AMT memory bank.

Listening to stored stations

Select the memory bank or waveband.
u
Press the station button 1 - 5 8 of the
u
desired station.
Scanning receivable stations
(SCAN)
You can use the scan function to play all the
receivable stations briefl y. You can set the
scanning time from 5 to 30 seconds in the
menu (in increments of 5 seconds).
Starting SCAN
Press and hold down the MENU button
u
> for longer than two seconds.
Scanning begins. "SCAN" and frequency
are intermittently shown on the display.
16
All manuals and user guides at all-guides.com
Cancelling the SCAN and continuing to
listen to a station
u
Scanning stops and the radio continues
playing the station that it tuned into last.
Setting the scanning time
(SCAN TIME)
u
The display shows "MENU".
u
u
"SCAN" and the currently set value are dis-
played.
u
When you have fi nished making your
changes,
u
To exit the menu,
u
Confi guring the display
In radio mode, you have the option of dis-
playing the memory bank or the memory
location and the frequency or the memory
bank and the time.
To switch between the display options,
u
Press the MENU button >.
Press the MENU button >.
button 2 repeatedly
Press the or
until "SCAN TIME" appears on the dis-
play.
Press the button 2 to open the sub-
menu.
Set the desired scan time using the
button 2.
or
press the MENU button >.
press the ESC button <.
Note:
The adjusted scan time also applies to
scan processes in MP3/WMA mode.
press the DIS button ;.