Adjusting The Tuner; Switching To Radio Mode - Blaupunkt Brisbane SD48 Notice D'utilisation Et De Montage

Adjusting the volume
When you have fi nished making your
changes,
press the MENU button >.
u
To exit the menu,
press the ESC button <.
u
Notes:
• If the volume listened to is higher than
the set "TEL VOL" value, telephone
calls or navigation announcements
are played back at the volume lis-
tened to.
Using the volume control 6, you can
•
adjust the volume for telephone calls
and navigation announcements di-
rectly during the playback.
14
All manuals and user guides at all-guides.com
Radio mode

Adjusting the tuner

To ensure proper functioning of the tuner,
the device must be set for the region in
which it is being operated. You can select
between Europe (EUROPE), America (USA)
and Thailand (THAI). The tuner is factory-
set to the region in which it was sold. If you
experience problems with your radio recep-
tion, please check this setting.
The radio functions described in these op-
erating instructions refer to the tuner set-
ting USA.
u
u
The current setting is displayed.
u
To save the setting and to exit the menu,
u

Switching to radio mode

If you are in SD, USB, CD changer or AUX-IN
mode,
u
or
u
Switch off the device by pressing but-
ton 4.
Hold the buttons 1 8 and DIS ;
pressed at the same time and switch on
the device again with the button 4.
Select your tuner region with the
button 2.
press the MENU button >.
press the BND•TS button 5
press the SRC button 3 repeatedly
until "TUNER" appears on the display.
Radio mode
or