Table des Matières
Publicité
SNOWBLOWER DISMOUNTING
WARNING
TO PREVENT INJURIES:
Stop the motor.
Apply parking brakes.
Remove the ignition key.
Disconnect the wire from the spark plug(s) and
keep away from spark plug(s) to prevent accidental
starting.
CAUTION
The belt tension and lift assist spring arm are
spring loaded & need to be held firmly while
displacing to prevent injury
a) Remove the hair pin and the handle from the
rotation system.
b) Remove the belt guard and release the tension on
the belt by displacing the tension arm backwards.
The tension arm is spring loaded and needs to be
held firmly while lowering to prevent injuries.
Remove the belt.
c) Detach the snowblower by removing the lift assist
spring and by lifting the two spring locks on the
male quick hitch and pulling out the snowblower
one side at a time.
DISMOUNTING
.
13
Publicité
Table des Matières
