Insert the handgrip (item 1) on the handle as shown.
Insert the handle hook (item 2) into the handle and
secure with a 2.5 mm hair pin (item 3) as shown.
VERIFY SKID SHOE ADJUSTMENT:
LEVEL PAVED SURFACE: Adjust skid shoes to allow
3/16" to 1/4" clearance (A) between cutting edge and
surface.
UNEVEN OR GRAVEL SURFACE: Adjust skid shoes
to allow 1/2" to 5/8" clearance (A) between cutting
edge and surface.
VERIFY TIRE PRESSURE:
Check and adjust tractor tire pressure as follows:
Front tires:
Back tires:
Tire pressure must be even on both sides of tractor.
ASSEMBLY
14-15 psi
7-8 psi
8
Install handle
Adjust skid shoes