Using The Water Dispenser; Filling The Water Dispenser's Tank - Beko REC36S2 Manuel D'utilisation

Operating the product
5.11. Using the
Water Dispenser
*May not be available in all models
C It is normal for the first few
glasses of water taken from
the dispenser to be warm.
C If the water dispenser is not
used for a long period of time,
dispose of first few glasses of
water to obtain fresh water.
1. Push in the lever of the water
dispenser with your glass. If you are
using a soft plastic cup, pushing the
lever with your hand will be easier.
2. After filling the cup up to the level you
want, release the lever.
C Please note, how much
water
dispenser depends on how
far you depress the lever. As
the level of water in your cup
/ glass rises, gently reduce
the amount of pressure on
the lever to avoid overflow.
If you slightly press the
arm, the water will drip; this
is quite normal and not a
failure.
Refrigerator/User Manual
flows from the
5.12.
Water Dispenser's Tank
Water tank filling reservoir is located
inside the door rack.
1. Open the cover of the tank.
2. Fill the tank with fresh drinking water.
3. Close the cover.
C Do not fill the water tank
with any other liquid except
for water such as fruit juices,
carbonated
alcoholic drinks which are not
suitable to use in the water
dispenser.
will be irreparably damaged
if these kinds of liquids are
used. Warranty does not cover
such usages. Some chemical
substances
contained in these kinds of
drinks/liquids may damage the
water tank.
C
Use clean drinking water only.
C
Capacity of the water tank is
3 litres; do not overfill.
19 / 26 EN
Filling the
beverages
Water dispenser
and additives
or