Brewing Process (Example) - Klarstein MUNDSCHENK 3XL Mode D'emploi

EN
24

BREWING PROCESS (EXAMPLE)

• Always Clean the machine before and after use.
• Assemble the Bazooka filter to the tap, and add the required quantity of water
before switching on.
• Heat up the water to 66-68°C, then add the grain into grain basket and stir it
gently.
• When the correct temperature is reached, start the circulation pump and regulate
the flow as described in the next paragraph.
Press AUTO/PAUSE enter recipe edit page.
Press AUTO again to edit/
check next step
Press START in boiling step for hops
reminder setting
If you want to skip the hop reminder
setting, press START again,
machine start to heat
You can edit Temp/Power/Timer
Press START not in boiling step, machine
start to heat. RXSX at the top left corner
will keep flashing when machine is
Press TIMER button to set 2nd hops
reminder. Press Timer again to for 3rd,
4th, 5th...9th setting. Hops countdown
timer setting must be 1st>2nd>3rd... >9th.
Press START button to start heating
working.
Press „-" or „+" to set
hops countdown timer