Model I-380; Model I-580X - Conrad Electronic I-180 Notice D'emploi

• When using the timer function, the fog burst always lasts 3 seconds; you can set
the break between the fog bursts from 5 to 200 seconds with the interval con-
troller.
Extending the break time
Reduce the break time

Model I-380

• This model has a manual and a timer function and can also be controlled via an
external DMX controller (see next chapter).
• As soon as the device is turned on, the display POWER (red) and READY (green)
blink.
• Once the heating phase is finished, the displays POWER (red) and READY (green)
stay lit.
• Press the green fog button on the remote control to trigger the fog function man-
ually. This button always triggers the fog output, even when the timer function is
deactivated.
• Turn the interval controller to the right to turn on the timer function. The yellow dis-
play lights up as soon as the timer function is activated.
• When using the timer function, the fog burst always lasts 3 seconds; you can set
the break between the fog bursts from 5 to 200 seconds with the interval con-
troller.
Extending the break time
Reduce the break time
• As long as the device re-heats, the displays POWER (red), READY (green) and,
insamuch as active, the display TIMER (yellow) blink.

Model I-580X

With this model, you can set the fog duration, the break duration between fog bursts
and the fog output.
• The red display is lit as soon as the device is turned on.
• Once the heat-up phase is complete, the green display is lit additionally and the
device is ready for fogging.
• Press the green fog button MANUAL on the remote control to trigger the fog func-
tion manually. This button always triggers the fog output, even when the timer
function is deactivated. In addition, this function always puts out the maximum
fog quantity.
• Press the yellow button TIMER to activate the timer function.
With the controller INTERVAL, set the break time between the fog bursts (range
from 10 seconds to 5 minutes).
With the controller DURATION, set the duration of each fog burst (range 1-10 sec-
onds).
• Press the red button CONTINUOUS to trigger continuous fog operation.
Control the fog output with the controller OUTPUT.
24
Turn the controller clockwise
Turn the controller counterclockwise:
Turn the controller clockwise
Turn the controller counterclockwise: