Extel WECA 109058 Mode D'emploi Et D'installation page 30

e - Installing the bolt
On a door which opens to the left (or opposed to the movement of
the internal block handle), the blue screw (b), behind the internal
handle, must be in the opposite hole on the right.
f - Position of the square
Seen from outside:
Check from outside if the rectangle of the lock is properly positioned regarding the door. Then adapt
the square to the thickness of the door and insert it on the lock.
g - Installing the lock on the door
If necessary, shorten the fixing screws in order to
adapt them the thickness of the door.
If they have to be shortened, it is necessary that at
least 4 complete threads hold, without screwing
excessively, the lock, the rear panel, the door and the
2 flanges.
All manuals and user guides at all-guides.com
Hinges on the right side:
The square (c) must move
the bolt as shown below.
(c)
5EN
(b)
(c)
Hinges on the left side:
The square (c) must move
the bolt as shown below.