Safety Instructions; General Power Tool Safety Warnings - WOLFF FRASMASTER 230 V Traduction Du Mode D'emploi D'origine

Technical data
Power supply....................................... ...............230 V AC
Frequenz............................................................40-60 Hz
Power consumption .............................................1500 W
Maximum speed.......................... ......6.000 - 10000U/min
Weight.....................................................................6,2 kg
Sound pressure level..........................................91 dB (A)
Sound energy level............................................107 dB (A)
Hand / arm vibration.............................................2,5 m/s²
Max. grooving deth................................................0-5 mm
Grooving blade.........................................tungsten tipped
Diameter..............................................................130 mm
Thickness..............................................................3,3 mm
Number of teeth.............................................................12
Tooth formation..................................................half round
Includes:
1 Grooving machine FRÄSMASTER
1 Safety goggles
1 Ear protection
1 Tool kit
1 Dust bag
1 Carrying case
1 Operating manual
Wolff GmbH & Co KG | D-74360 Ilsfeld | Ungerhalde 1 | Fon: +49 (0)7062-91556-0 | Fax: +49 (0)7062-91556-41 | www.wolff-tools.de
All manuals and user guides at all-guides.com

2.0 Safety instructions

2.1 General Power Tool Safety Warnings

Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Disconnect the power supply before any maintenance is
carried out. Use only the recommended blade and ensure
it is sharp before starting. Maintenance should be underta-
ken only by qualified personnel. Use only genuine WOLFF
spare parts.
always wear goggles and ear protectors supplied.
Otherwise you are in danger of injuring your eyes or
your ears.This machine works at a high speed and
these precautions are for your safety!
2.2 Accident prevention regulation noise
The entrepreneur has to provide suitable hearing protec-
tors available to insured persons who are employed in the
noise area. The insured must use the hearing protection in
noise areas.
When working without ear protectors can cause an im-
pairment of health. In particular, it can lead to a hazard or
damage to the hearing or an increased risk of accidents.
Read all safety warnings and all
instructions.
Warning
When using the grooving machine
(VBG 121)
Each machine comes with safety
goggles and ear protection. Plea-
se always use these for your own
safety!
EN
9