Danby Designer DMW758BL Guide Du Propriétaire page 23

MEMORY
SAVING ONE OR TWO-STAGE
PROGRAMS
1 Touch "MEMORY".
2 Touch "POWER" and set the
desired Power Level.
3 Enter time using number pad.
4 If finished, touch "MEMORY"
to save the program; for two
stages, repeat steps 2 to 3
and then touch "MEMORY".
SAVING ONE OR TWO-STAGE
DEFROSTING PROGRAMS
1 Touch "MEMORY".
2 Touch "DEFROST " once for
Defrost by Weight, twice for
Defrost by Time.
3 Enter the defrosting weight or
time using the number pad.
4 If finished, touch "MEMORY"
to save the program. For two
stages, repeat steps 2 to 3 in
SAVING ONE OR TWO-
STAGE PROGRAMS above,
and then touch "MEMORY".
All manuals and user guides at all-guides.com
Operating Instructions
The MEMORY program is useful for saving and storing the
cooking requirements of your favorite meals that are not already
programmed into the microwave, so you can recall them at the
push of a button. You can save up to two programs by pressing
"MEMORY" : press once for the first saved program, or twice for
the second. To activate a selected MEMORY program, touch
"START/+30Sec.".
Saving a one or two-stage cooking program:
1 Touch "MEMORY". "1" appears on the display (to save
another program, press "MEMORY" again (twice total) and
"2" appears on the display).
2 Touch "POWER" and reduce the Power Level (if required)
to the desired strength, or simply continue to step 3 to use
the default (100%) power setting.
3 Enter the cooking time length using the number pad.
4 If a second cooking stage is required, repeat steps 2 to 3
and then continue to step 5; if only one stage is required,
continue to step 5.
5 Touch "MEMORY" to save the program.
Saving a one or two-stage defrosting program:
1 Touch "MEMORY". "1" appears on the display (to save
another program, touch "MEMORY" again (twice total) and
"2" appears on the display).
2 Touch "DEFROST" once for Defrost by Weight or
twice for Defrost by Time (dEF1 and dEF2, respectively).
3 If you've chosen Defrost by Weight (dEF1), enter the
weight (in ounces) using the number pad; if you've chosen
Defrost by Time (dEF2), enter the time using the number
pad. If nothing more is required, move on to step 6;
however, if another stage is required continue to step 4.
4 Touch "POWER" and reduce the Power Level (if required)
to the desired strength, or simply continue to step 5 to use
the default (100%) power setting.
5 Enter the cooking time length using the number pad.
6 Touch "MEMORY" to save the program.
22