Disposal; Problem-Solving; Technical Specifications; Declaration Of Conformity - iTronics IR8000 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

9. Disposal

The symbol showing a wheelie bin crossed through indicates
that the product requires separate refuse collection in the
EN
European Union. This applies to the product and all accessories
marked with this symbol. Products identified with this symbol
may not be discarded with normal household waste, but must
be taken to a collection point for recycling electric and electronic appliances.
Recycling helps to reduce the consumption of raw materials and protect the
environment.
Packaging
When disposing of the packaging, make sure you comply with the environmental
regulations applicable in your country.

10. Problem-solving

If your device fails to function as required, please try this checklist first. Perhaps
there is only a minor problem, and you can solve it yourself.
DANGER of electric shock! Do not attempt to repair the device yourself
under any circumstances.
Fault
No function
Objects are not
clean after the
cleaning process.
Possible causes /Action
Has the device been connected to the
power supply? Check the connection.
Is a sufficient amount of water in the
stainless steel tank 2? Are the objects
covered by water?
Has a cleaner been added?
Is the concentration of the cleaner strong
enough?
Has a basket inset 11 been used during the
cleaning process?
Is the cleaning period sufficient?
Has the cleaning fluid been changed?
-12-

11. Technical specifications

Model:
IR 8000
Mains voltage:
220-240V~ 60Hz
Power rating:
50W
Subject to technical modification.

12. Declaration of Conformity

This device has been tested according to all relevant current CE guidelines, such
as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.

13. Warranty of the iTronics

Dear Customer,
your device is provided with one year warranty starting with the purchase date.
In the event of product defects, you are entitled to statutory rights against the
vendor. These statutory rights are not restricted by our warranty presented in
the following.
Warranty conditions
The warranty period starts with the purchase date. Please keep the original pur-
chase receipt in a safe place. This document is required to verify the purchase.
If within one year from the purchase date of this product a material or factory
defect occurs, the product will be repaired or replaced by us - at our discretion
- free of charge to you. This warranty implies that within the period of one year
the defective device and the purchase receipt are presented, including a brief
written description of the defect and the time it occurred.
If the defect is covered by our warranty, the repaired or a new product will be returned
to you. No new warranty period starts with a repair or replacement of the product.
Warranty period and statutory claims for defects
The warranty period is not extended when the warranty has been claimed. This
also applies to replaced and repaired parts. Any damages and defects already
-13-
EN

Publicité

Table des Matières
loading

Produits Connexes pour iTronics IR8000

Table des Matières