Festo CPV GE-ASI-8E8A-Z-M8-CE Serie Mode D'emploi page 18

3.2 Assigning the AS−Interface addresses
Note
Addressing of valve terminal type CPV...−GE−ASI−8E8A−
Z−M8−CE is only permitted with addressing devices acc.
to specification 2.1 or higher.
Other addressing devices do not allow unique access to
the slaves, among other things, and may overwrite the
ID1 codes.
Recommendation:
For addressing use addressing device type ASI−PRG−ADR
with adapter cable type KASI−ADR from Festo.
Factory setting:
The addressing device scans the existing slaves in the
AS−Interface network.
Assign the desired addresses to the two slaves one
S
after the other.
Operation with AS−Interface masters < specification 3.0
Operation with AS−Interface masters less than specifica
tion 3.0 is fundamentally not possible.
18
slave 1: address #1, A−slave
slave 2: address #1, B−slave
Festo CPV...−GE−ASI−8E8A−...−CE 0703NH English