Conversion Of The Circuit Board For The Lighting - marklin 58013 Mode D'emploi

Conversion of the circuit board for the lighting

The circuit board for the lighting is ready for the installation of a function decoder. With this decoder the lights in
either half of the car's corridor or in half of the compartments can be turned on separately in digital operation.
With the half dining car (example: 58043) or the half baggage car (example: 58053) the quantity of LED's turned on is
influenced by the different functions. It is not possible in these cars to separate the lights turned on into particular
function areas as with the compartment cars.
1. Remove the car roof
Important: The roof has several very rigid snap-in connections. A certain amount of force is therefore necessary to
remove the roof.
12