Getting Started; Operation Guide; Installing The Batteries; Display Modes - Eton ESP2100 Mode D'emploi

D E S C R I P T I O N A N D
B
A
C
H
A. NOAA
Change NOAA weather radio operation mode (Monitor/Standby/Mute/Off)
and change for channels frequencies from 1 to 7
B. Up/Down volume (< vol >) button
Adjustment to high or low volume at your desired
C. Radio
Change radio operation mode to (FM/AM/OFF) and change Alarm on/off
function
D. Display/Snooze/Set (DISP/SNZ/SET)
- Change LCD display mode to (Alarm 1/Alarm 2/Calendar/Thermometer),
and when alarm is activating, press once to enter snooze mode; and if
weather alert is activating, press once to turn off the alert.
- Press and hold 2 seconds to enter SET mode for Alarm1/Alarm2/Time/
Calendar/12- 24/county code setting.
E. Store/Recall (STR/RCL)
Store and recall the radio station memories
F. Up/Down tuning (+/- tuning) button
Up/Down tuning for radio stations or selection of pre-set memory; and
change of setting mode
G. Stereo headphone jack
H. AC/DC adapter jack
I. Detachable antenna
J. Detachable Belt-Clip
F U N C T I O N S O F P A R T S
D E
J
G
6
I

GETTING STARTED

Before operation, please study the manual to get familiar with basic functions
and features of the unit. The unit does not have an On/Off switch and the LCD
will illuminate once the batteries are inserted. However, the radio can be set to
NOAA-on, NOAA stand-by, NOAA-mute, or NOAA-off positions.
Note: Keeping the radio permanently on, will consume substantially more
F
power. Subsequently, NOAA stand-by is recommended when the user is not
listening to radio broadcasts.

INSTALLING THE BATTERIES

The unit uses 3 x AA 1.5V alkaline batteries.
1. Gently push toward to open the battery door
2. Flip-up the battery door and insert with new batteries strictly according to
the polarities shown
3. Replace the battery door

DISPLAY MODES

There are three lines of display indications:
1 st line displays clock
2 nd line displays variables Alarm 1/Alarm 2/Temperature/Calendar by pressing
(DISP/SNZ/SET) button
3 rd line displays radio station frequencies, pre-set memory, and NOAA channel
indicator when channel is being set.
Note: Before setting any data, please note that if no data is input within 15
seconds, the original data will resume on the display.

HOW TO SET THE ALARMS

ALARM 1
1. Press and hold (DISP/SNZ/SET) for 2 seconds (to set ALARM 1 mode)
2. Press Up/Down (+/- tuning key) to set Hour
3. Press (STR/RCL) once to flash minute
4. Press Up/Down (+/- tuning key) to set minute
5. Press (RADIO) to activate/deactive the alarm ("The bell" symbol appears in
the display when the alarm is activated).
6. Press (DISP/SNZ/SET) once to return to normal
G E T T I N G S T A R T E D
O P E R A T I O N G U I D E
7