Télécharger Imprimer la page

LGB 55027 Instructions De Service page 13

Publicité

© DiskArt™ 1988
Specifications:
- dimensions: 55 x 25 mm
- input voltage: 0-24 volt DC or DCC
- motor terminal: max. 3 amp
- lighting terminals: max 0.3 amp each
- function terminals: max. 0.3 amp each
(Max. 1 amp for the sum of all lighting and function terminals.)
Attention! Never install a decoder when the loco is connected to a
powered track or power source. The decoder must be mounted in
a dry and protected location. Attach the decoder securely, so that
it cannot loosen and cause short circuits.
Caractéristiques techniques :
- Dimensions : 55 x 25 mm
- Alimentation en tension : 0 à 24 V DC ou DCC
- Sortie moteur : max. 3 A
- Sorties éclairage : max. 0,3 A chacune
- Sorties de fonction : max. 0,3 A chacune
(max. 1 A au total de toutes les sorties d'éclairage et de fonction).
Attention ! N'installez jamais un décodeur sous tension. Le décodeur
doit être sec et être monté de manière à être protégé. Fixez le décodeur
correctement et de manière permanente pour éviter tout court-circuit.
9

Publicité

loading