Reheating; Defrosting; Interrupting Toasting; Cleaning And Care - ARENDO 301829 Mode D'emploi

8 Reheating

The toaster can be used to reheat the bread slices if they cool down too quickly. To
do this, press down the "slide switch" until it clicks in place and press the "REHEAT"
button. When bread which has already been toasted becomes too cool or has been
forgotten about, the toaster can be used to reheat it without affecting the degree
of browning too much.

9. Defrosting

Frozen toast bread can be defrosted directly in the toaster. To do this, insert the
frozen toast into the "toast slot" and then press down the "slide switch" until it
reaches the limit stop. Switch the device to the defrosting mode using the "DE-
FROST" button. To set the duration of the defrosting process, use the rotary switch
provided for adjusting the degree of browning.

10. Interrupting toasting

If the bread starts to smoke or you want to stop the toasting process, you can
press the "CANCEL" button. In this case, the toaster interrupts the toasting process
immediately.

11. Cleaning and Care

Before cleaning the toaster, unplug it completely from the mains by removing the
power plug. Wait until the device has cooled down completely. Clean only the sur-
face with a slightly damp cloth. Never use a metal polish for this purpose! Do not
immerse the device in water under any circumstances!
Ensure that crumbs do not collect in the toaster. Bread crumbs can be removed
by taking the crumb collector out of the toaster and cleaning it with a damp cloth.
Ensure that you afterwards re-insert the crumb collector correctly.
Caution! Remember to empty the crumb collector on a regular basis. If a large
amount of crumbs are allowed to build up, this may lead to a fire!
The internal components of the toaster can be easily damaged. Do not touch the
components with tools or other objects under any circumstances!
26
English