Scope Of Supply; Technical Data; Commissioning - ARENDO 301829 Mode D'emploi

Thank you for choosing an Arendo product. Please read the following user manu-
al carefully so that you can enjoy your purchased product for a long time. Before
using the delivered product, check that it is complete, faultless and undamaged.

1. Scope of supply

• Long-slot toaster
• Bread roll warming rack
• User manual

2. Technical data

Power supply
Ambient temperature
Power input
Features

3. Commissioning

Note: The toaster may emit a burning smell when it is being used for the first
time while the heating elements are warming up. This is not a hazard or a defect.
When using the toaster for the first time, wait until the device has heated up and
the smell has disappeared. When using the toaster for the first time, it is advisable
to switch on the toaster without inserting any toast.
When the device is put into operation for the first time, check the intactness of
the product or components and their function again. Take the device out of the
package and remove all the packaging material. Before using the toaster for the
first use time, connect it to a properly wired power socket. Set the rotary switch
which has been provided for adjusting the degree of browning to the highest
setting and switch on the toaster by pressing the slide switch down. Repeat this
procedure until the burning smell is no longer noticeable. To interrupt toasting,
press the "CANCEL" button.
English
220-240V AC 50-60 Hz
+ 0-3°C until 35-40°C
1200-1500 W
• Continuously adjustable degree of
browning
• Defrosting mode
• Function for reheating already toasted
bread/toast
• Crumb collector
23