auna Connect 150 MKII Mode D'emploi page 55

3. Turn and press the NAVIGATE dial to choose 'Timeout'.
4. Turn and press the NAVIGATE dial to choose a timeout setting. To specify
that the backlight should always remain on, choose 'On'.
Power-on level
1. Press and hold the MENU button on main unit or remote control and
turn and press the Select dial to select 'Main Menu'.
2. Turn and press the NAVIGATE dial to choose 'System settings' >
'Backlight'.
3. Turn and press the NAVIGATE dial to choose 'On Level'.
4. Turn and press the NAVIGATE dial to choose between 'High', 'Medium'
or 'Low'.
Dim level in standby
1. Press and hold the MENU button on main unit or remote control and
turn and press the Select dial to select 'Main Menu'.
2. Turn and press the NAVIGATE dial to choose 'System settings' >
'Backlight'.
3. Turn and press the NAVIGATE dial to choose 'Standby Level'.
4. Turn and press the NAVIGATE dial to choose between 'Medium' or 'Low'.
Carrying out a factory reset
Resetting removes all presets, stored stations, alarms and resets all other
options to default settings.
1. Press and hold the MENU button on main unit or remote control and
turn and press the Select dial to select 'Main Menu'.
2. Turn and press the NAVIGATE dial to choose 'System settings' > 'Factory
Reset'.
3. Turn and press the NAVIGATE dial to select 'Yes' to reset factory settings.
Select 'No' if you do not want to reset to factory settings.
EN
55