auna Connect 150 MKII Mode D'emploi page 43

GETTING STARTED
1. Unclip the aerial and fully extend it (steps A and B).
Insert the jack of the supplied mains adapter into the socket on the rear
of the radio (C).
Plug the mains adapter into the mains supply (D)
2. Press the Standby button to power on.
3. The first time you switch on you will be asked if you would like to run the
setup wizard, which will help you connect to your Wi-Fi. If you want to
run the setup wizard now, turn and press the Select dial to select 'Yes'
and follow the prompts on screen. To set up later, turn and press the
Select dial to select 'No'.
EN
43