Sony RDP-XA700iP Mode D'emploi page 16

Option 3: Wi-Fi Connection
using Access Point Scan
1
Prepare for the following
devices.
• This unit
• Mac or PC
• Wireless LAN router/access point
• Network (LAN) cable (not supplied) if
needed
2
Have your wireless network
name (SSID) and Security Key
(if applicable) available for
reference.
SSID (Wireless Network Name)
Security Key (WEP or WPA key)
Refer to the operating instructions of the
wireless LAN router/access point.
3
Connect the unit and the Mac or
PC using a network (LAN) cable
(not supplied). Then turn this
unit on.
Wait for about 4 minutes until the LINK
indicator lights up amber.
Tip
You can also perform this procedure
wirelessly. See "To connect wirelessly"
(page 13).
4
Access the [Sony Network
Device Setting] screen.
12
GB
For Mac
Start Safari and select [Bonjour] under
[Bookmarks], then select [RDP-
XA700iP].
For PC
Start the browser and input either of the
following URLs into the browser's
address bar.
• When using a network (LAN) cable
• When connecting wirelessly
5
Select the desired language
when the [Language Setup]
screen appears.
6
Select [Network Settings] from
the menu.
Network Settings