Sony RDP-XA700iP Mode D'emploi page 11

Rear
A WPS button
Use to connect the unit to your Wi-Fi
network, refer to the supplied "AirPlay via
Wi-Fi Network Setup" for details.
B LAN port
Connect a network (LAN) cable (not
supplied, page 11).
C ALL RESET button
Press and hold to reset the unit to the
factory default settings (the ?/1 indicator
starts flashing).
Use a thin object, such as a small pin.
D DC IN 19.5 V jack
Connect the supplied AC adaptor (page 9).
E AUDIO IN jack
Connect to the line output jack of an
external component (page 18).
7
GB