Urmet 1093/134M1 Guide Rapide page 19

Before using the device, record a demo video to verify the correct functionality of this feature. URMET
S.p.A. is not in any way responsible for loss of recorded data consequent to wrong setting or usage,
device misfunctioning or failure.
This device is composed by electronic precision components. Do not hit the device while recording as it
might affect the video.
Privacy and Copyright
The IP camera is designed for surveillance systems. Video recording is subject to the laws applicable to
the Country where used.It is forbidden to record images with Copyright.
The User is responsible to check and respect all local laws and norms for video signal recording. The
manufacturer is NOT in any way liable for any usage of the product which might result not compliant to
the relevant norms. For further information please visit http://www.garanteprivacy.it/web/guest/home_en
Firmware upgrade
Refer to URMET S.p.A. Customer Service Technical Assistance periodically to check availability of
firmware upgrades.
Network configuration
Camera default setting is DHCP mode. If the network does not support dynamic addressing (DHCP),
the device will automatically switch to factory IP 192.168.1.168. Use Urmet "Device Search Tool"
software to modify the IP address and other network settings to prevent any conflict with other devices
on the network.
Once the camera is correctly connected and configured on the IP network it will be possible to show
video and settings on any PC or smartphone.
Network connections
When connecting a PC (using Software Client or Browser), any video channel on the PC will be using
"unicast" connection (TCP, RTP, UDP).
The device can support up to 5 "unicast" connections so it is possible to show the video on maximum 5
remote devices (PC or smartphone) at the same time depending on the available network band.
DS1093-135 19