Electrolux EWF 128500 W Notice D'utilisation page 7

ter, please read the paragraph «At the end
of the programme».
Night Cycle: by selecting this option, the
machine will not drain the water of the last
rinse, so as not to wrinkle the laundry. As all
spinning phases are suppressed, this
washing cycle is very noiseless and it can
be selected at night or in times with a more
economical power rate. On some pro-
grammes the rinses will be performed with
more water. When the programme has fin-
ished, the display shows three blinking
, the icon 7.10 is still visualized, the
light of button 8 is off and the door is
locked to indicate that the water must be
emptied out. To empty out the water,
please read the paragraph «At the end of
the programme».
7.5: Option icons.
• Extra Rinse
,
• Easy Iron
,
• Sensitive
(if available).
7.6: Child safety lock
in this model
7.7: Soil degree icons
• Intensive
• Normal/Daily
• Light/Quick
• Super Quick
7.8:
• Duration of the selected programme
After selecting a programme, the duration
is displayed in hours and minutes (for ex-
ample ). The duration is calculated
automatically on the basis of the maxi-
mum recommended load for each type of
fabric. After the programme has started,
the time remaining is updated every mi-
nute.
• End of programme
When the programme has finished three
blinking zeros (
icon 7.10 disappears and the door can
be opened.
• Incorrect option selection
All manuals and user guides at all-guides.com
- not available
) are displayed, the
If an option which is not compatible with
the set wash programme is selected, the
message Err is displayed at the bottom
of the display for a few seconds and the
integrated red light of button 8 start flash-
ing.
• Alarm codes
In the event of operating problems, some
alarm codes can be displayed, for exam-
ple (see paragraph «What to do
if...»).
• Delay Time value
7.9: Clock icon
After the programme has started, the dura-
tion is displayed and the clock icon is ani-
mated.
7.10: Door locked icon
After you have pressed button 8 and the
machine has started, this icon is lighted on
and only the phase running icon stays on.
When the programme has finished, three
flashing zeros (
this icon disappears.
7.11: Washing programme phase icons
• Prewash
• Wash
• Rinses
• Drain
• Spin
By selecting the wash programme, the
washing programme phase icons corre-
sponding to the various phases making up
the programme are shown in the upper part
of the display. After having pressed button
8 only the icon of the running phase stays
on.
7.12: Delay icon
The selected delay set by pressing the rele-
vant button appears on the display for a
few seconds, then the duration of the previ-
ously selected programme is displayed. The
relevant icon is lighted on. The delay time
value decreases by one unit every hour and
then, when 1 hour remains, the time de-
creases every minute.
electrolux 7
) are displayed and