Installation - Electrolux EWF 128500 W Notice D'utilisation

Electrical connection
Voltage - Overall power - Fuse
Water supply pressure
Maximum Load
Spin Speed

INSTALLATION

UNPACKING
All transit bolts and packing must be re-
moved before using the appliance.
You are advised to keep all transit devices
so that they can be refitted if the machine
ever has to be transported again.
1. After removing all the packaging, care-
fully lay machine on it's back to remove
the polystyrene base from the bottom.
2. Remove the power supply cable and
the draining and inlet hose from the
hose holders on the rear of the appli-
ance.
All manuals and user guides at all-guides.com
Information on the electrical connection is given on the rating
plate, on the inner edge of the appliance door.
Minimum
Maximum
Cotton
Maximum
0,05 MPa
0,8 MPa
7 kg
1200 rpm
3. Unscrew the three bolts.
4. Slide out the relevant plastic spacers.
5. Open the porthole and pull out all items
from the drum. Remove the polystyrene
block fitted on the door seal.
electrolux 23
2
1