Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
Should any problem persist after you have made these checks, consult your nearest
authorized Sony dealer.
Symptom
You hear no dial tone.
The phone does not connect at all,
even the number you dial is correct.
The phone does not redial correctly.
The phone does not make a speed
dialing call.
You cannot store a speed dial number. • Make sure you follow the procedure in storing the
The phone does not ring.
Specifications
Dial signal
Tone, 10 PPS (pulse) selectable
Dimensions
Approx. 115 × 70 × 220 mm (w/h/d)
5
(approx. 4
/
× 2
8
Mass
Approx. 560 g
(approx. 1 lb 7 oz)
Supplied accessories
Telephone line cords (4-conductor type)
(long: 2/ short: 1)
Wall bracket
Screws (4)
Directory label (1 sheet)
Design and specifications are subject to change without notice.
Remedy
• Make sure the telephone line cord is securely connected
to the telephone outlet.
• Make sure the dialing mode setting (pulse or tone) is
correct.
• Make sure the number (including the tone and pause
digits, if used) you last dialed is less than 32 digits for
pulse dialing more or 31 digits for tone dialing mode.
• Make sure the last dialed number is really the one you
want to dial.
• Make sure there is a phone number correctly stored in
the speed dialing.
number correctly.
• Make sure the number (including the tone and pause
digits, if used) is less than 16 digits for pulse dialing
more or 15 digits for tone dialing mode.
• Set the L1 and L2 RINGER switches to H or L.
7
3
/
× 8
/
inches)
8
4
Publicité
