Sony IT-M11 Mode D'emploi page 7

Making calls with speed dialing
Press (LINE 1) or (LINE 2) to select the line.
1
2
Pick up the handset.
Press (SPEED DIAL).
3
Press the desired speed dialing number ((0) to (9)).
4
The phone number stored in the speed dialing number will be dialed.
Having a three-way conference call
You can talk on two lines at the same time.
Making another call while talking
1
3
1
Press (HOLD) while talking on one line.
The line in use is put on hold.
2
Press (LINE 1) or (LINE 2), whichever is not used.
3
Dial a phone number for the second party.
4
Press (CONF) (conference) after you're connected to the second party.
Now you can talk to both parties.
Receiving a call while talking
Press (HOLD) while talking on one line.
1
The line in use is put on hold.
Press (LINE 1) or (LINE 2), in which another call is coming.
2
Press (CONF) (conference).
3
Now you can talk to both parties.
Note
If you do not press (HOLD) in step 1, the first line will be disconnected.
To disconnect the lines during a three-way conference
To disconnect both lines at the same time, replace the handset in the cradle.
To disconnect line 1 and continue talking on line 2 only:
Press (LINE 2).
To disconnect line 2 and continue talking on line 1 only:
Press (LINE 1).
To put the lines on hold during a three-way conference
Press (HOLD). Both lines are put on hold.
To resume the conversations on both lines, press (CONF).
To resume the conversation only on one line, press (LINE 1) or (LINE 2), for the line you
want.
Note
During a three-way conference, do not press (FLASH) to use "call waiting" service. Otherwise, both
lines will be disconnected.
Mounting the phone on a wall
1
Remove the hang-up tab and replace it upside down.
2
Attach the telephone line cord(s) to the wall bracket.
3
Hook the wall bracket to the wall plate, and plug the telephone line cord(s)
into the telephone outlet(s).
Instead of hooking to the wall plate, you can mount the wall bracket directly
using the four supplied screws (see Fig. A).
4
Plug the other end of the telephone line cord(s) into the LINE 1 and/or LINE
2 jack(s).
5
Insert the upper tabs first, then press the phone into the wall bracket so that
the lower tabs on the wall bracket go into the phone.
4
2
1
3
Wall plate
4, 5
Maintenance
On handling
• Do not attempt to disassemble the casing. Refer servicing to qualified personnel only.
• Do not put foreign objects into the unit. Should any liquid or solid object fall into the
unit, unplug the unit and have it checked by qualified personnel before operating the
unit any further.
• Do not drop the unit as a malfunction may result.
On cleaning
• Clean the cabinets with a soft cloth slightly moistened with water or a mild detergent
solution. Do not use any type of abrasive pad, scouring powder or solvent such as
alcohol or benzine as they may damage the finish of the cabinet.
If you have any questions or problems concerning your phone, please consult your nearest
Sony dealer.
Hang-up tab
Wall
bracket
2
Telephone line
cord(s)
Fig. A