How To Adjust A Setting; Adjusting The Picture - Atlantis Land I-See S 173 Mode D'emploi

•
Contrast
Adjust contrast or adjust function.(tone up the volume while have
the audio frequency)
•
MENU ：
Activate the OSD menu or confirm the function adjusting.
•
Power Key
Press this button to switch ON/OFF of monitor's power.
•
Power Indicator:
Blue/Green ---- Power On mode.
Orange/Red ---- Off mode.

3.2 How to adjust a setting

1. Press the MENU button to activate the OSD window.
2. Press or
MENU button again.
3. Press or
,press the MENU button to confirm it.
4. If you want to adjust any other function, repeat steps 2-3.
5. If you want to exit the OSD image, select the "exit function/EXIT
OSD", or leave the monitor alone for 20 seconds (Windows
default), the OSD window will close and sure automatically.
6. When the OSD window is active, it shows the input signal timing.

3.3 Adjusting the picture

1. BRIGHTNESS
1.1 Auto gain control: Adjust the gain automatically.
1.2 Brightness: Adjust the brightness automatically.
1.3 Contrast: Adjust the contrast automatically.
1.4 Exit
2. COLOR (In the state of DVI without this item)
2.1 Auto color: Adjust the color automatically.
2.2 Exit
:
：
to select the desired function, then press the
to change the settings of the current function
A05-17AM-L02_MX01
11