Self Test Pattern; Adjust Picture; Operations Of The Monitor; Power On/Off Switch - Atlantis Land I-See S Serie Mode D'emploi

2.3 Self test pattern

2.4 Adjust picture

In order to obtain the best visual display, you must adjust it, please refer to chapter 3 "Operation of the monitor".

3. Operations of the monitor

3.1 Power on/off switch

This is a slight-touch digital-control key. It is used to turn the monitor on or off.

3.2 Power LED indicator

When the monitor is working, the power LED is green. If the monitor is in saving power mode, the power LED will be red
and flashing. If you turn off the computer, the power LED is off. When the LED is off, the monitor is off, but the power
adapter is on. For the purpose of security, you should turn off adapter power when you don't use the monitor.
A05-1XAX-C0X_MX03
If there is no horizontal or vertical sync. signals, your monitor will display the self test
pattern to indicate no signal input. After a few seconds, the monitor will enter into
waiting and saving power mode. The LED will be red and flashing. Once the monitor
receives the video signal, it will return to normal mode.
ENGLISH
5