DeWalt DW0165 Mode D'emploi page 21

measurement to be deleted.
• Press .
• Select and press
measurement.
6.
To delete ALL measurements:
• Press .
• Select and press
measurements from the tool's memory.
Turning Off the Tool
The tool can be turned off in either of these ways:
• Press and hold
you release after 10 seconds, the tool will
turn off.
• If you do not use the tool for 90 seconds, it will
automatically turn off.
Calibrating the tool
Please note that if you do not position the tool correctly
for each step of the calibration process,
in red on the screen (Figure
1. Point the tool's laser (Figure
or object, and not toward anyone's eyes.
2.
Press (Figure
and display the red laser dot.
3.
Press to display the Main Menu
(Figure ).
E 2
4.
On the Main Menu, select
5.
On the Settings Menu (Figure
and press .
6.
Place the tool with the screen facing upward on a
flat, level surface (Figure
7.
Press .
8. While the tool is still laying on the level surface,
turn the tool 180° (Figure
9.
Press .
10.
Flip the long side of the tool 90° so it is laying on
its side (Figure
X 3
All manuals and user guides at all-guides.com
to delete the
to delete all
for 10 seconds. When
will appear
).
X
) toward a wall
A 1
) to turn the tool on
A 3
and press
), select
G
).
X 1
).
X 2
).
11.
Press .
12.
While the tool is still laying on its side, turn the
tool 180° (Figure
13. Press .
14. Make sure
(Figure
X 5
Three Year Limited Warranty
D WALT will repair, without charge, any defects due
E
to faulty materials or workmanship for three years
from the date of purchase. This warranty does not
cover part failure due to normal wear or tool abuse.
For further detail of warranty coverage and warranty
repair information, visit www.D
1–800–4-D WALT (1–800–433–9258). This warranty
E
does not apply to accessories or damage caused
where repairs have been made or attempted by
others. This warranty gives you specific legal rights
and you may have other rights which vary in certain
states or provinces.
In addition to the warranty, D
covered by our:
1 YEAR FREE SERVICE
D WALT will maintain the tool and replace worn parts
E
caused by normal use, for free, any time during the
first year after purchase.
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the
performance of your D
Nailer for any reason, you can return it within 90 days
.
from the date of purchase with a receipt for a full
refund - no questions asked.
RECONDITIONED PRODUCT: Reconditioned product
is covered under the 1 Year Free Service Warranty.
The 90 Day Money Back Guarantee and the Three
Year Limited Warranty do not apply to reconditioned
product.
FREE WARNING LABEL REPLACEMENT: If your
warning labels become illegible or are missing, call
1-800-4-D WALT or visit your local service center for
E
a free replacement.
).
X 4
appears on the tool's screen
).
WALT.com or call
E
WALT tools are
®
E
WALT Power Tool, Laser, or
E
E
21