Detectalia V75 Manuel D'utilisation page 16

7. Detection function setting
7.7 Machine sensitivity
parameters setting
8. P10/H-*** Note hole filling function Settings: H-OFF is off, H--ON is open; the default is H--ON(open); (ref. Picture 6-11~12).
9. P11/***** Speed setting: 1000, 1200, 1500, the default is 1000; (ref. Picture 6-13~15).
10. P17/Ir--* IR sensitivity: 0 is off, 9 is highest, the default is 5 (ref. Picture 6-16).
11. P18/JC--* Notes feeding sensitivity: 0 is off, 9 is the highest, the default is 5 (ref. Picture 6-17).
12. P19/CC--* Notes stacker sensitivity: 0 is off, 9 is the highest, the default is 5 (ref. Picture 6-18).
13. P20/SLO-* Notes oblique sensitivity: 0 is off, 9 is the highest, the default is 5 (ref. Picture 6-19).
16
V75