PPPoE is used to connect eneo products to PPPoE modem provided by ISP. Since
PPPoE needs verifi cation, ID and password are necessary to access network. Type
in ID and password.
Administrator password
To change the password for the administrator, click Admin Password on System
Confi guration menu.
Default ID for admin account is fi xed as "root" and not allowed to change. In Old
Password fi eld, enter the current password. In both New Password and Confi rm
Password fi elds, enter the same new password. The password must be between
4 and 23 alphanumeric letters. Click Apply button to put it into eff ect.
Because you have replaced the password with a new one, the existing network
connection made with old password now is lost. You will have to reconnect using
the new password.
Accessing the setup menu
The setup menu can be accessed and controlled either by using the OSD control
joy stick on the side of the camera and a service monitor or by entering the Admin
menu in your web browser.
To access the OSD menu click Camera & Motion in the Device Confi guration menu
and click Camera Control.
Camera setup
29
DE
EN
FR
PL
RU