Accessing the camera
The network camera's default IP address is: 192.168.1.10.
Therefore, to access the camera for the first time, set the PC's address as
192.168.1.XX; for example:
IP Address: 192.168.1.20
Subnet Mask: 255.255.255.0
• Enter the camera's IP address in the URL bar of the Web browser window and hit
"Enter."
• Enter the default user name (root) and password (root) in the prompt request
dialogue.
It is also possible to reset IP parameters to the original factory default settings by
pressing the IP reset switch located next to the video sub-out connector for 10 sec.
Then Smart Viewer will be automatically downloaded and installed. If the Internet
Inclination limited to +/-90° max.
Network setup
25
DE
EN
FR
PL
RU