Hints On Disposal - Klarstein GLACIAL Mode D'emploi

EN
28
Fault Inspection
Less or thin ice Condenser
cubes
Filter
Water pump
Ambient
temperature
Air inlet

HINTS ON DISPOSAL

If there is a legal regulation for the disposal of electrical
and electronic devices in your country, this symbol on the
product or on the packaging indicates that this product must
not be disposed of with household waste. Instead, it must be
taken to a collection point for the recycling of electrical and
electronic equipment. By disposing of it in accordance with
the rules, you are protecting the environment and the health of
your fellow human beings from negative consequences. For
information about the recycling and disposal of this product,
please contact your local authority or your household waste
disposal service.
Cause Solution
Excessive fouling Clean the
of the condenser condenser.
results in poor
air intake, high
condensation
temperature, and
long ice making
time
The filter is Clean or replace
clogged, causing the filter.
poor water flow.
Pump failure Replace the water
caused poor pump.
water flow.
Ambient Place the machine
temperature is too in a room with
high. an appropriate
temperature.
Poor air pressure Keep a distance
leads to high of at least 15 cm
condensation to the left and
temperatures and right sides and the
long ice making rear.
times.