Disposal Considerations - Klarstein KRISTALL Mode D'emploi

EN
18
Problem Possible Cause
The Ice made is Water temperature is too
too large and with low.
pieces sticking
Ice of previous cycles left
together.
in the water tray.
The program of No coolant in compressor.
making ice is
Compressor is damaged.
correct, but no ice
come out.
Fan motor is damaged.
All indicators The ice is not access to ice
twinkle board.
simultaneously.
The movable detect device
the ice board is damaged.
The ice is full to The movable detect device
reach the ice the ice board is damaged.
board, but no full
The indicate light is
indicate.
damaged.
Important Notes
• It is normal for the compressor and condenser surface to reach temperatures between
70°C and 90°C during operation and surrounding areas may be very hot.
• Due to fast freezing, ice cubes may appear "Cloudy". This is air trapped in the
water and will not affect quality or taste of ice.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical
and electronic devices in your country, this symbol on the
product or on the packaging indicates that this product must
not be disposed of with household waste. Instead, it must be
taken to a collection point for the recycling of electrical and
electronic equipment. By disposing of it in accordance with
the rules, you are protecting the environment and the health of
your fellow human beings from negative consequences. For
information about the recycling and disposal of this product,
please contact your local authority or your household waste
disposal service.
Suggested Solution
Select small size.
Take out the ice under the
standby state.
Call the service centre.
Unplug the power and plug
again to restart the machine.
Call the service centre.
Call the service centre.