Commissioning And Operation - Klarstein GLACIAL Mode D'emploi

EN
24
CLEAN/
In the standby mode, press this button and then press the /,
TIMER buttons to set the reservation time for power on. In the power on
mode, press this button and then press the / buttons to set the
reservation time for power off. In the standby mode, press this key for
3 seconds, the machine will enter cleaning mode.
DE-ICE In the ice making mode, press this button to enter deicing in advance,
the machine will defrost.
If you press and hold this button for 3 seconds during the ice making
mode, the blue light will turn off.
Indicator light
FILTER
TIMER
WATER
POWER
ICE
ICE FULL
CLEAN

COMMISSIONING AND OPERATION

1. The ice maker is used for making and storing ice. In order to ensure hygiene during
making ice, please observe the following principles:
• Wash your hands before removing the ice, use the plastic ice spoon to take ice out.
• In addition to ice, please do not put any other things into the ice storage bin.
• Clean the ice storage bin before use. Keep the spoon clean and clean it with a
neutral detergent.
• After removing the ice, please close the door again to prevent dust from entering.
2. The following basic guidelines must be observed when using electrical appliances:
• High humidity environment will increase the risk of short circuit or electric shock, if in
doubt, please cut off the ice maker power.
• Do not pull the power cord to shut down the machine.
Description
It is time to change the filter when the indicator light is
flashing.
The indicator light indicates that the timer function has been
When the indicator lights up permanently, water must be
added. The light blinks during your adding water.
The indicator light flashes in standby mode and lights
permanently when the appliance is in operation.
Lights up permanently when the appliance is in operation.
Lights up permanently when the ice storage bin is full.
Lights up permanently when you use the cleaning function.