Scope Of Delivery; Proper Use - Gardeo PRO GBV2502LW Traduction Des Instructions D'origine

Scope of delivery

• Open the packaging and remove the device carefully.
• Remove the packaging material as well as the packa-
ging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage.
• If possible, store the packaging until the warranty pe-
riod has expired.
ATTENTION
The device and packaging materials are not toys!
Children must not be
allowed to play with plastic bags, film and small
parts! There is a risk of swallowing and
suffocation!
• Machine
• 2 x wheel
• 2 x wheel cover
• Collection box
• Wheel spindle
• 2 x wheel spindle sheath
• 2 x washer
• 2 x nut
• Internal hex wrench
• Allen wrench (6 mm)
If any parts are missing or damaged, please con-
tact your dealer.

Proper use

CE tested machines
machine guidelines as well as all relevant guidelines for each
machine.
• The machine has been built in accordance with state-
of-the-art standards and the recognized safety rules.
Nevertheless, ist use may constitute a risk to life and
limb of the user or of third parties, or cause damage
to the machine and to other material property.
meet all valid EC
• The machine must only be used in technically perfect
condition in accordance with is designated use and
the instructions set out in the operating manual, and
only by safety-conscious persons who are fully aware
of the risks involved in operating the machine.
Any functional disorders, especially those affecting
the safety of the machine should therefore be
rectified immediately.
• The garden shredder may only be used for
cutting twigs, branches, shrubs, garden wastes, paper and
cardboard.
• Any other use exceeds authorization. The manufacturer
is not responsible for any damages resulting from unau-
thorized use; risk is the sole responsibility of the operator.
• Do not put soil or hard objects such as glass, stones,
pieces of metal and roots with adhering earth into the
garden shredder.
• The safety , work and maintenance instructions of the
manufacturer as well as the technical data given in
the calibrations and dimensions must be adhered to.
• Relevant accident prevention regulations and other,
generally recognized safety- technical rules must also
be adhered to.
• The machine may only be used, maintained, and op-
erated by persons familiar with it and instructed in ist
operation and procedures. Arbitrary alterations to the
machine release the manufacturer from all responsibil-
ity for any resulting damages.
• The machine may only be used with original acces-
sories and original tools made by the manufaturer.
Remaining hazards
The machine has been built using modern technology in
accordance with recognized safety rules. Some operat-
ing hazards, however, may still exist.
• Injury caused by kick-back of branches while
feeding. Securely hold long,thick branches. Wear personal
protective gear such as gloves and safety goggles.
• Health risks caused by noise. Wear personal protec-
tive gear (ear protection)
• Health risks caused by electricity. When incorrect or
damaged mains cables are used. Follows instructions
in the manual Electrical Connections.
• Even when all safety measure are taken,
2