EcoFlow DELTA Pro Manuel D'utilisation page 10

3.4 AC Charging
EcoFlow's X-Stream fast charge technology is specifically for AC charging, offering 1800W of max
input power. You can control the charging power through the AC Charge Speed Switch. The default
max input power for the AC charging speed is 400W, which can be modified in the EcoFlow app.
In case of unusual situations where the AC input current remains higher than 20A, the X-Stream
charging input port will initiate a self-protection function, and the Overload Protection Switch on the
product will automatically pop up. After confirming that there is no product failure, you can press the
Overload Protection Switch to resume charging.
The charging power can be adjusted through the AC Charge Speed Switch on the back of the
product. You can set the charging power range in the EcoFlow App.
Please use EcoFlow AC Cable for fast charging. EcoFlow takes no responsibilities for any
consequences caused by failures to follow instructions, including but not limited to charging with
third-party AC cables.
X-Stream Fast Charging
2875W Max input Power
≈ 1.9 hrs Full Charge
AC Charging
Cable
X-Stream Fast Charging
2875W Max input Power
Customized Charging Power Rate
Range: 200-2875W
(Default: 400W)
EcoFlow APP
English edition
7