BeautyMix BM01 Notice D'utilisation page 98

1. Place the scales on a flat surface and
press the ON / OFF button
2. Press and hold the M button until the
display shows " CAL " for calibration.
3. Press M again. The display will show the
weight to be placed on the scales plate.
4. Place the reference mass on the weighing
plate. The screen displays " PASS "
5. Remove the mass and turn off the scales.
Using the " Counting " function of the scales
Your scales allow you to count light objects. To
use this function, follow the instructions below:
1. Sampling: Prepare a sample of 25, 50, 75
or 100 pieces of the object you want to
count. Place the sample on the scales
and press the "PCS" key until the display
shows "25", "50", "75" or "100". Press the
"UNIT" button to change the displayed
number until it matches the number of
objects in your sample placed on the
scales. Press "PCS" again, and the text
29