VINCENT RC-572 Manuel D'utilisation page 75

1. On the HOME page select
MENU, then LEARN, followed by
ADVANCE LEARN. Now choose
the device to which the function
key to be programmed belongs
and touch the desired function key.
2. The display now reads
"Learning" as well as "LEVEL 1"
and both remote controls should
oppose each other. Hold down
the original remote control key for
the first command until the dis-
play reads "Learn OK!". If the
signal is received erroneous, the
display shows the text "LEARN
ERROR" and the old infrared fun-
ction (if any) of the function key
will be kept. If no signal is recei-
ved, the display reads "NO
DATA" and the old infrared func-
tion (if any) of the function key
will be kept. Check in both cases
if the batteries of the original
remote control are used up and if
both controls are positioned face-
to-face while learning.
3. After the first command has been
accepted you can add the
second command by touching the
function key again. The display
now reads "Learning" as well as
"LEVEL 2" and again, both remo-
te controls should oppose each
other. Hold down the original
remote control key for the second
command until the display reads
"Learn OK!".
4. Add more infrared functions as
described in (3.). After 5 com-
mands have been transferred suc-
cessfully, every additional lear-
ning cycle overwrites the com-
mand next in the already pro-
grammed sequence starting with
step 1.
5. You can now equip other function
keys with a cyclic sequence of
commands or return to the HOME
page using the button .
Vincent
75